Add a More Comfortable Contact Surface to Your Top Case
Turn the rear of a compatible aluminum motorcycle top case into a more passenger-friendly contact surface.
This two-piece backrest set combines an upper cushion and larger lower cushion to provide padded contact where a passenger naturally leans against the luggage case.
The smooth black finish keeps the installation visually simple while adding cushioning without a bulky external frame or bracket system.
Check Your Top Case Before Ordering
This product is not universally compatible with every 45L or 55L motorcycle case.
It is intended for compatible aluminum top cases with enough rear-panel space for both cushions.
Choose the version that matches your case and compare the cushion measurements with the available mounting area before ordering.
45L Version
Upper cushion:
- Approx. 12.5 cm wide
- Approx. 9 cm high
Lower cushion:
- Approx. 26 cm wide
- Approx. 16 cm maximum height
- Approx. 12 cm side height
55L Version
Upper cushion:
- Approx. 13.5 cm wide
- Approx. 8.5 cm high
- Approx. 11 cm lower width
Lower cushion:
- Approx. 28 cm wide
- Approx. 17 cm maximum height
- Approx. 14.3 cm side height
- Approx. 11.5 cm upper section width
Manual measurement variation may occur.
Check:
- rear-panel width
- available height
- hinge position
- mounting hardware
- rear-panel curvature
- adhesive contact area
Not suitable for plastic top cases.
Two-Piece Cushioning Where It Matters
The upper and lower cushions are positioned separately so each piece can sit against a different section of the top case.
The outer surface is made from PU material, while the interior uses foam sponge cushioning to create a softer contact surface than the bare luggage case.
The result is a practical touring accessory intended to improve passenger contact comfort while maintaining a compact profile.
Simple Adhesive Installation
Each cushion mounts directly to the rear surface of the compatible top case using the double-sided adhesive backing.
Before installation:
- Confirm cushion position and clearance.
- Clean the mounting surface thoroughly.
- Allow the surface to dry completely.
- Remove the adhesive backing.
- Align the cushion carefully.
- Press firmly into position.
Avoid exposing the installed cushions to rain for 48 hours after installation so the adhesive can establish proper contact.
No drilling is specified for this product.
Designed for Practical Touring Use
The smooth black exterior is designed to pair naturally with common black and metallic aluminum motorcycle luggage.
The compact two-piece layout adds cushioning without changing the basic function of the top case or requiring a large external support structure.
It is a straightforward upgrade for riders who want additional passenger comfort while keeping the luggage setup clean and functional.