Centralized Control For Your Vehicle Accessories
Bring your auxiliary electrical accessories together with a 6-gang switch panel designed for practical vehicle customization.
Control up to six independently wired accessory circuits from one mounted panel, use the included wireless remote when convenient, or make adjustments through the MICTUNING smartphone app.
With adjustable RGB backlighting and a separate control box, the system provides a flexible way to organize compatible vehicle lighting and other electrical accessories.
One panel. Three control methods. Six independent circuits.
Check Vehicle Compatibility Before Installation
This 6-gang system is designed for compatible 12V and 24V DC vehicle electrical systems, including suitable trucks, SUVs, RVs, and off-road vehicles.
Before ordering, confirm that your vehicle has sufficient mounting space, an appropriate electrical installation location, and accessory loads within the system's ratings.
The control box supports a maximum combined current of 60A. Individual circuits have their own specified fuse ratings, and all connected loads must remain within both the applicable circuit limit and the total system limit.
Installation requires connection to the vehicle electrical system, routing the switch-panel wiring, and connecting the accessories being controlled.
Works With:
- Suitable 12V/24V DC vehicle electrical systems
- Compatible auxiliary lighting and electrical accessories
- Installations with sufficient switch-panel and control-box clearance
- Accessory loads within the appropriate electrical ratings
Not Suitable For:
- Unsupported vehicle electrical systems
- Loads exceeding individual circuit or combined system limits
- Installations without adequate mounting clearance
- Applications expecting wireless operation without a wired control-box installation
Important: Vehicle make and model alone do not establish electrical or physical compatibility. Verify your intended installation before ordering.
Three Ways To Control Your Accessories
Choose the control method that fits your setup.
Use the mounted switch panel for direct access to each circuit, operate supported accessories from the included wireless remote, or customize switching behavior through the MICTUNING smartphone app.
The remote offers an advertised range of up to 230 feet under ideal, unobstructed conditions. Actual range can vary with installation placement, surrounding structures, and interference.
The app provides additional options for organizing switches, choosing lighting colors, and adjusting supported control settings after pairing.
Direct Panel Control. Wireless Remote. Smartphone App.
Customize Each Switch To Match Your Setup
Configure your panel around the accessories you actually use.
Choose between four operating modes: Toggle for standard on/off switching, Momentary for operation while the button is held, Flash for repeating flashing behavior, and Strobe for a more rapid lighting pattern.
Adjust the panel's RGB backlighting and select from six brightness levels to suit your interior and viewing conditions.
The compatible app also supports switch grouping and customization options, helping make each circuit easier to identify.
Practical control, personalized to your vehicle.
Organized Wiring With A Separate Control Box
Keep accessory control centralized with the included control box and dedicated switch panel.
The system uses individually fused circuits for connecting compatible electrical accessories, while the panel provides access to their switching functions.
The supplied wiring harnesses, mounting brackets, fasteners, and labeling accessories support a structured installation.
The six outputs are rated individually, with a maximum combined system current of 60A. Always select compatible accessories and follow the manufacturer's wiring requirements.
Designed for a more organized electrical accessory setup.
Mount It Where It Works For Your Vehicle
Position the control panel where it remains accessible without interfering with normal driving controls.
The mounting hardware supports different installation approaches, including bracket-based mounting and the adhesive mounting arrangement described in the manufacturer instructions.
Depending on the installation location, wiring may need to be routed through interior trim, and the control box must be securely positioned near suitable vehicle electrical connections.
Installation involves electrical wiring and mounting work. Professional assistance may be appropriate if you are unfamiliar with vehicle accessory circuits.
Plan the mounting location and electrical connections before installation.
Know What's Included
The 6-gang system includes the main switch panel, separate control box, circuit breaker, wireless remote, antenna, wiring components, mounting hardware, and labeling accessories shown in the manufacturer's 6-gang packing list.
The panel measures approximately 3.9 inches wide by 2.7 inches high, making it suitable for installation locations with adequate clearance.
Connected accessories such as auxiliary lights, horns, and other electrical equipment are not included unless specifically listed with a separate bundle.
A complete switch-control system for compatible accessory installations.