More Useful Power From One 12V Outlet
Turn a compatible vehicle 12V accessory socket into a practical multi-port power station for travel, commuting, and mobile work.
The inverter combines two 110V AC outlets, USB-C PD charging, QC3.0 USB charging, two additional USB-A ports, and a 12V accessory output in one compact unit.
For clear power expectations, the AC outlets support a maximum combined AC load of 150W. When the USB and Type-C charging interfaces are also being used, total connected load must remain within 200W.
Check Compatibility Before You Connect
This version is designed for a 12V vehicle electrical system and connects through the vehicle's cigarette-lighter or accessory socket.
The manual specifies an input range of DC 10V to 15V, with input over-voltage protection at approximately 16V ±0.5V.
The supplied model is the 110V AC version shown in the product listing.
Before connecting an AC device, check its required wattage. The inverter's maximum AC output is 150W, and the output waveform is modified sine wave.
Works With:
- Compatible 12V vehicle accessory sockets
- Devices whose power requirements stay within the inverter's verified output limits
- USB-powered electronics compatible with the available charging outputs
Does Not Suit:
- 24V-only vehicle power connections
- AC equipment requiring more than 150W
- Applications specifically requiring a pure sine wave inverter
- Equipment whose starting or operating load exceeds the inverter's limits
AC, USB-C & USB Charging In One Unit
The compact housing provides several connection options without requiring multiple separate adapters.
The product includes:
- 2 AC outlets
- 1 USB-C PD output
- 1 QC3.0 USB-A output
- 2 standard USB-A outputs
- 1 DC12V accessory output
The manual specifies the standard USB pair at DC 5V/3.1A AUTO, QC3.0 output at DC 5V/3.4A, 9V/2A, or 12V/1.5A, USB-C PD output at DC 5V/3A, 9V/3A, or 12V/2.5A, and the 12V accessory output at DC12V/4A.
That combination makes the inverter useful when several different connection types are needed in the same vehicle.
Monitor Vehicle Voltage While You Drive
The integrated LED display shows the vehicle battery voltage while the inverter is connected.
Once plugged into the vehicle's 12V socket, the display activates and the USB outputs become available. The AC outlets are activated separately through the AC power switch.
This gives the driver a simple visual reference for the voltage being supplied to the inverter without adding another standalone display.
Built For Practical In-Vehicle Use
The inverter uses a compact fire-resistant plastic housing with ventilation and an internal cooling fan.
The manual specifies protection against:
- Overload
- Short circuit
- Input over-voltage
- Input under-voltage
- Overheating
Fan operation and some temperature rise are normal during use. Keep the ventilation openings unobstructed and keep the inverter dry.
At approximately 170 × 87 × 37 mm and 350 g, the unit is compact enough for practical storage when it is not being used.
Simple Connection With Realistic Power Expectations
Connect the inverter to a compatible vehicle 12V accessory socket. The LED display will show vehicle battery voltage and the USB charging outputs will activate.
For AC use, connect a compatible device to one of the AC outlets and switch on the AC output.
Do not exceed the product's stated load limits, and avoid extended operation after switching the vehicle engine off. The manual warns that prolonged use with the engine off can significantly reduce battery voltage and may affect vehicle starting.
After use, disconnect the inverter from the vehicle's accessory socket and store it appropriately.
Best For:
- Travel charging
- Mobile work
- Everyday electronics
- Road trips
- Vehicle-based power access
Not Intended For:
- High-wattage household appliances
- Devices exceeding the stated AC power limit
- Pure-sine-wave-specific applications
- Prolonged battery-powered operation with the vehicle engine switched off