Take A More Convenient Approach To Engine Oil Changes
Make routine engine oil maintenance more manageable with a compact electric extraction pump designed for compatible engine oils.
Powered by a 12V DC connection, the 80W pump draws oil through an accessible dipstick opening and transfers it through the supplied discharge hose into a suitable collection container.
With its compact housing, included hoses, and direct battery connection, it offers a practical extraction option for hands-on vehicle owners.
Check Compatibility Before You Start
This pump is designed for use with suitable engine oil and requires a compatible 12V DC power source, appropriate hose access, and correct operating conditions.
Before using the pump, confirm:
- Your vehicle or equipment has an accessible oil extraction point.
- The suction tube can reach the oil reservoir through the intended opening.
- The oil is within the specified 40–60°C operating range.
- The fluid is not excessively viscous.
- You have a suitable 12V DC battery connection.
Important: This pump is not designed for every fluid or engine configuration. Oil extraction performance depends on oil viscosity, temperature, hose positioning, and the equipment being serviced.
Straightforward Setup For Routine Maintenance
The pump connects directly to a suitable 12V battery using its attached red and black clamps.
To prepare for extraction, position the inlet hose at the accessible oil reservoir and route the outlet hose into an appropriate collection container. Once the hoses and power connections are correctly secured, operate the pump using its ON/OFF switch.
The compact design keeps the main components together for convenient storage between maintenance tasks.
Setup Overview
- Confirm oil temperature and fluid compatibility.
- Position the inlet hose at the intended extraction point.
- Route the outlet hose into a suitable collection container.
- Connect the battery clamps with the correct polarity.
- Operate the pump according to the supplied instructions.
- Switch off, disconnect, and clean the equipment after use.
Compact Equipment With The Essentials Included
Designed around a compact orange and black pump housing, this extraction kit includes the hoses and battery clamps needed for a compatible setup.
The electric pump features metal hose connection ports, a built-in power cable, and an accessible ON/OFF switch.
Its portable format makes it suitable for keeping with other routine vehicle maintenance tools without requiring a permanent installation.
Included With The Pump
- 1 × 12V 80W electric oil extractor pump
- 1 × suction hose, approximately 1.5 m
- 1 × discharge hose, approximately 1.2 m
- 2 × metal hose clamps
- Attached power cable with red and black battery clamps
Practical Oil Extraction With Realistic Expectations
The 80W motor provides powered fluid transfer for compatible engine oil, helping support routine extraction tasks without the need for a manual hand pump.
For suitable oil, the supplier lists an approximate oil flow rate of 1 liter per minute. Actual extraction speed can vary depending on viscosity, temperature, hose positioning, and operating conditions.
Very thick oil is not suitable, and the pump should be used only within its specified operating requirements.
For best results, use the pump as part of a maintenance procedure appropriate for your particular vehicle or equipment.
What To Know Before Purchasing
This is a compact electric oil extraction tool for compatible maintenance applications, not a universal fluid transfer system.
It requires a suitable 12V DC connection and an accessible point for placing the suction hose.
It is not intended for gasoline, water, kerosene, gearbox oil, or very viscous liquids. Extraction speed and the amount of oil removed depend on the equipment and operating conditions.
Check your vehicle's service guidance to determine whether dipstick-based oil extraction is appropriate for your maintenance task. This pump does not replace other required oil service steps, including filter replacement and proper handling of used oil.