Wireless Auxiliary Switch Panel with 4 or 6 Circuits 12V/24V

$149.99

CHOOSE 4 OR 6 CIRCUITS – Select the configuration that matches your accessory setup.

12V/24V DC COMPATIBILITY – Designed for compatible automotive and marine electrical systems.

WIRELESS SWITCH PANEL – Pairs with the control box without a direct panel-to-box control wire.

FOUR CONTROL MODES – Constant, Momentary, Flash, and Strobe operating options.

DUAL PANEL POWER OPTIONS – Operates using two AAA batteries or continuous USB power.

ACCESSORY WIRING REQUIRED – Control box connects to vehicle power, ACC, and accessory circuits.

In stock

Product Type: Wireless auxiliary switch panel and circuit control system

Available Configurations:

4 Gang (BA40)
6 Gang (BA60)

Primary Function: Controls compatible auxiliary electrical accessories through a wireless switch panel paired with a wired control box.

Key Features:

Wireless communication between switch panel and control box
Independent control of 4 or 6 accessory circuits
Constant, Momentary, Flash, and Strobe modes
Illuminated switch panel
Configurable switch-label decals
AAA battery or continuous USB panel power
Angled mounting bracket
Control mode settings retained for subsequent use

Applications: Compatible automotive, off-road, RV, and marine 12V/24V DC accessory installations.

Color: Black

Important: Vehicle electrical wiring is required. The wireless connection is between the switch panel and the control box.

4 Gang (BA40)

Model: BA40
Circuits: 4
Operating Voltage: 12V/24V DC
Maximum Total Current: 60A
Maximum Power at 12V: 720W
Maximum Power at 24V: 1440W
Operating Temperature: -30°C to 85°C
Control Panel Power: 2 AAA batteries or USB
Panel Dimensions: Not verified

6 Gang (BA60)

Model: BA60
Circuits: 6
Operating Voltage: 12V/24V DC
Maximum Total Current: 80A
Maximum Power at 12V: 960W
Maximum Power at 24V: 1920W
Operating Temperature: -30°C to 85°C
Control Panel Power: 2 AAA batteries or USB
Approximate Panel Face Dimensions: 5.1 × 1.4 inches, based on supplier illustration

Shared Specifications

Control Modes: Constant, Momentary, Flash, Strobe
Wireless Panel Pairing: Supported
Panel Color: Black
Mounting: Bracket/panel mounting
Control Box: Fused accessory circuit outputs
Panel Housing Material: Not independently verified
Control Box Housing Material: Not independently verified
Product Weight: Not provided

Individual circuit loads must remain within the manufacturer-specified fuse ratings. Maximum total current is not the allowable load for every individual output.

Designed for compatible 12V/24V DC systems.

Installation Requirements

Secure the control box in a suitable mounting location.
Connect the control box to the required electrical power connections.
Connect the ACC input as directed in the manufacturer manual.
Wire each accessory to the appropriate control-box output.
Mount the wireless switch panel securely.
Supply power to the panel using AAA batteries or USB.
Pair the panel with the control box.
Configure the desired operating modes.

Pairing

Use the control-box pairing button and the panel button as directed in the manual. The control-box indicator flashes three times when pairing succeeds.

Included With Your Selected Configuration

1 wireless switch panel with 4 or 6 buttons
1 matching 4-circuit or 6-circuit control box
Mounting components
Switch-label decals
Wiring accessories and terminals
Circuit fuses
USB power cable
AAA batteries
Fasteners and installation tools as supplied
Manufacturer instructions

Exact connector, fuse, and hardware quantities differ by model.

Not Included

Auxiliary LED light bars or other electrical accessories being controlled
Vehicle-specific wiring modifications or installation services

Compatibility Notes

Not all vehicles have the same available mounting space or electrical configuration.
The control box requires wired electrical connections.
Some installations may require professional assistance.
Accessories must comply with the model's total current and per-circuit electrical limits.
Flashing and strobing functions must be used in accordance with applicable regulations.

One Panel. Organized Accessory Control.

Bring your auxiliary accessory controls together with a wireless switch panel designed for 12V/24V electrical systems.

Available in 4-circuit and 6-circuit configurations, this system pairs a compact illuminated control panel with a separately wired control box, allowing you to operate compatible accessory circuits from one convenient location.

Choose the setup that suits your vehicle and the number of accessories you want to control.

Check Compatibility Before Installation

Designed for compatible 12V and 24V DC electrical systems.

The switch panel communicates wirelessly with the included control box, but the control box must still be connected to vehicle power, ACC, and the accessories you intend to operate.

Installation requirements:

A compatible 12V/24V DC power supply.
A suitable ACC connection for normal operation.
Appropriate wiring for each connected accessory.
A secure mounting location for the control box and switch panel.
Electrical loads within the chosen model's total and individual circuit limits.

Choose the correct configuration:

4 Gang (BA40): Four circuits, up to 60A total.
6 Gang (BA60): Six circuits, up to 80A total.

This system is not a completely wireless installation. Electrical wiring and correct circuit protection are required. Vehicle-specific fitment is not guaranteed, so check mounting clearance and electrical requirements before ordering.

Four Ways to Control Your Accessories

CONTROL MODES

Configure the switch operation to suit the accessory connected to each circuit.

Constant Mode: Press to turn the circuit on or off.

Momentary Mode: Activates the circuit while the button is held.

Flash Mode: Provides a repeating flashing output.

Strobe Mode: Provides a strobing output pattern.

The panel supports mode configuration and retains settings for subsequent use.

Use flashing or strobing functions only with compatible accessories and where permitted by applicable road and vehicle regulations.

Choose the Right Number of Circuits

VARIANT SELECTION

4 Gang (BA40)

A compact four-switch configuration for controlling up to four independent auxiliary accessory circuits.

Four individually controlled outputs
60A maximum total current
720W at 12V / 1440W at 24V maximum specified power
Shorter four-button control panel

6 Gang (BA60)

A wider six-switch configuration for setups that require more independent accessory controls.

Six individually controlled outputs
80A maximum total current
960W at 12V / 1920W at 24V maximum specified power
Wider six-button control panel

Both configurations include their corresponding control box and installation accessory set.

Each purchase includes one selected configuration, not both models.

Flexible Panel Placement Without a Control Wire

WIRELESS SETUP & POWER OPTIONS

The switch panel connects wirelessly to the control box, providing more flexibility when selecting a practical control location.

Power the panel using the supplied AAA battery option or connect a USB cable for continuous power.

The control box handles the wired accessory connections, while the panel provides your everyday control interface.

The system requires initial pairing and correct electrical installation before use. Actual wireless performance depends on mounting location and the surrounding environment.

Designed for Practical Everyday Control

DESIGN & APPLICATIONS

A compact black housing, illuminated switches, and an angled mounting bracket give the control panel a functional appearance suited to modern vehicle interiors.

Interchangeable switch-label decals help identify the circuits assigned to your accessories.

The system can be configured for compatible auxiliary lighting and other supported electrical accessories in automotive, off-road, RV, and marine applications.

Actual installation suitability depends on the vehicle's electrical system, accessory load requirements, and available mounting space.

Installation and Usage Considerations

PRE-PURCHASE REQUIREMENTS

Before installation, confirm your available power connections, accessory load requirements, and mounting locations.

The control box must be wired to the required vehicle electrical connections, including ACC, and each connected accessory must be installed using appropriate wiring and circuit protection.

The switch panel must then be powered, paired, and configured for the intended functions.

The system is suitable for users comfortable with automotive electrical installation. Professional installation may be appropriate if you are unfamiliar with vehicle wiring.

Important limitations:

The maximum total current differs between the 4-gang and 6-gang models.
Each output also has an individual fuse rating.
The system does not include the electrical accessories being controlled.
Compatibility with every vehicle, accessory, or mounting location is not guaranteed.
Flashing and strobing functions may be restricted by local regulations.

Frequently asked questions

Yes. Both the BA40 and BA60 are specified for 12V/24V DC systems. Compatibility also depends on the vehicle's power connections, mounting space, and the electrical requirements of the accessories being controlled.

No. The switch panel communicates wirelessly with the control box, but the control box must still be wired to vehicle power, ACC, and the connected accessories. Wireless operation eliminates the direct control-wire connection between the switch panel and control box.

The BA40 controls four independent circuits and supports up to 60A total. The BA60 controls six independent circuits and supports up to 80A total. The BA60 also has a wider six-button switch panel.

No. The panel can operate using two AAA batteries or USB power. When using USB, the cable must remain connected to provide continuous power.

Yes, provided those accessories are electrically compatible with the control box and do not exceed the applicable circuit limits. The system does not include the light bars or other accessories being controlled.

The system provides Constant, Momentary, Flash, and Strobe modes. The appropriate mode depends on the accessory and intended application. Flashing and strobing functions may be restricted on public roads.

Not necessarily, but the installation involves automotive electrical wiring, accessory connections, circuit protection, and panel pairing. Professional installation is recommended for customers unfamiliar with these tasks.

Fitment depends on the chosen mounting location and available clearance. The BA60 supplier graphic shows an approximate 5.1 × 1.4-inch panel face. Measure the intended installation area before purchasing.